Don Von Free Credits wrote:

OK, what choices does it give you on your bios screen?

When the first screen displays, immediately press the F10 key if your computer was built in 2006 or later (came with Vista). Press the F1 key if your computer was built before 2006 (XP or earlier). Press the key once every second until a BIOS Setup utility screen opens.
NOTE: On some Compaq Presario computers (before 2002), press the F10 key at the logo screen.

Don Von Free Credits wrote:

Here are the instrutions on how to get to the Bios:

When the first screen displays, immediately press the F10 key if your computer was built in 2006 or later (came with Vista). Press the F1 key if your computer was built before 2006 (XP or earlier). Press the key once every second until a BIOS Setup utility screen opens.
NOTE: On some Compaq Presario computers (before 2002), press the F10 key at the logo screen.

This is what it should look like:


You need to go to the boot tab and make sure that it is booting with the USB first.[/img]

Don Von Free Credits wrote:

Go to SYSTEM CONFIGURATION and take another pic.

Don Von Free Credits wrote:

Go to "select boot device" in the second pic.

USB should be an option after that.

Remember to change it back to the previous setting after you get the passwords.

QuTeePiiE wrote:

btw don wuld it be easier if i burned watz on the flash drive into a CD? because i have that option when i looked thru my flash drive yesterday to make sure all the filez were in tact